Capo tuner is used in two different ways. The first one is to produce sound from your guitar and the second one is to tune the guitar to match the sound. You don’t need to worry if it is your first time to tune your electric guitar with capo tuner. The steps below explain how to do it so you can use your favorite guitar just like what you want.
Electric Guitar Strings
Before tuning your electric guitar with capo tuner, you need to know the string’s note. There are 6 different strings and the thickest string is E. The standard tuning is E-A-D-G-B-E. While understanding the string note, you also must understand the music alphabet. Actually, you just need to use 7 first letters in the alphabet which are A-B-C-D-E-F-G. Those strings are the standard string and become the basic knowledge you must know to play a guitar including tuning your electric guitar.
Flat and Sharps
The next important thing you should learn is about two different terms in tuning guitar. First is known as flat. Flat is symbolized with lower case b. When being placed next to a natural note, that means the note is flat. If your guitar note is flat, it means that you have to come up a little bit to meet the right tone. The second term is known as sharps. Sharp is symbolized with a tic-tac-toe grid. If you are finding sharp while tuning your favorite guitar, it means that the note is a little bit too high. Your job is tuning the tone down a little bit to meet the standard. The point of tuning a guitar is to increase or lower the tone to get the right sound.
Calibration in Electric Guitar Tuning
Now, you can start to tune your electric guitar with a capo tuner. The first thing to do is calibrating the tuner and make sure that the tuner is set up in A 440 Hz. A440 Hz is the standard tuning frequency. It is very important to calibrate the tuner in the standard tuning frequency so you can hear the sound of the guitar. The most important in calibrating tuner is finding out the E string first. Then, you can start to find the fine tune and what you have to do is turning the tuning keys. Just make sure that the tuning needle is in the middle. Don’t forget to recheck your tuning and make sure that there is nothing changed after the tuning process.
Tips to Tune an Electric Guitar with Capo Tuner
The thing to remember while tuning your guitar by capo tuner is that you are tuning the right tuning key. Let say, you want to tune D string. This means you must notice the right string especially on the fretboard and the headstock. The most common mistake is that you want to tune D string, but in fact you are tuning the A string. Tuning the wrong string is dangerous because it might sometimes damage the string. That’s why it is a must for you to recheck anytime you finish tuning the string. How about if you are tuning too high or too far? The best solution is stopping the tuning process first. Then, crank the string down and you can start to tune the guitar with capo tuner from the beginning to get the best tune.