Guitar is one of the most popular music instruments that is played by most people. But it is not always easy to play the instrument especially for beginners. You need to practice a lot so you can play the instrument like a pro. This article will talk about the quickest practical way for playing as well as recording guitar.
Tips to Record Electric Guitar Easily at Home
If you are very fond of playing guitar and really want to record your play, here are some easy tips that you can use.
1. Using Cardioid Dynamic Microphone
Microphone is essential part in every recording session. To help create better result of recording, you can try to use cardioid dynamic microphone. There are many benefits you can get from this kind of microphone which include rejecting sounds that come from the rear. This is the most ideal microphone you can use for home recording where playing acoustic is usually not ideal in here. Moreover, the cardioid microphone used is commonly less sensitive to high frequency.
2. Place the Microphone Near to the Amp
The next tip is that you need to place the cardioid microphone close to the amp. It should be close enough in order to prevent any reflection and unwanted sound in your room. Commonly, the perfect distant of the mic and amp that will work best for the recording session is 0.5 inch or about 0 – 12.5 cm. But for some cases, the distant of 1 inch or 2.5 or closer can work better. By placing the mic close enough to the amp, it also will make it easier for you to find the most suitable tone for your guitar recording. It will be better if you have two microphones to record your guitar playing. You can place the first mic close to the amplifier and the other one further back to get better result of recording.
3. Find the Right Tone
The next tip for successful recording is finding the suitable tone for the amp. Just keep in mind not to rush it and you should spend some time to adjust the EX available on the guitar amp as well as the tone control you can find on the guitar. Set the mix phase to be zero in equalization. You also need to make sure that you choose less bass for the recording since you don’t need low end on the instrument.
4. Adjust the Tone
The next thing you need for guitar recording is to adjust the tone by adjusting the position first. You can start by finding the location of the speaker cone first. After that, you need to place the microphone about half way between the edge and the center of the speaker cone. You can identify any change in the tone by moving the speaker cone from left to right. The tone will be more aggressive and much brighter if you get closer to the middle part of the speaker.
We hope that this is beneficial for you to record your guitar play.